DVG-2101S
VOIP
Specification:
Key Components / Performance
CPU
MPS
DSP
LSI ZSP400/110MHz
Port Functions
1 x 10/100 BaseT ports
Compliant to following standards:
1. IEEE 802.3 (10BASE-T)
LAN
2. IEEE 802.3u (100BASE-TX)
3. IEEE 802.3x (Full-Duplex)
4. Support Full-Duplex operations
1 x Phone port
Phone Ports
1. Type of Circuit : Analog Circuit (FXS)
2. Connector Type : RJ11 connector
WAN:
z
z
z
z
z
z
z
One 10/100Mbps auto-MDI/MDIX Ethernet port
WAN type: Static IP, PPPoE, DHCP Client, BigPond
NAT Traversal: Outbound Proxy, STUN, UPnP
NTP
DDNS
RJ-45 Connector
Bridge mode
Call features:
Call Hold, Call Waiting, Cancel Call Waiting, Caller ID with Name/Number (Multinational),
Caller ID Blocking. Call Waiting Caller ID with Name/Number.
Call Forward - Unconditional, Busy, No Answer, Do Not Disturb.
Call Transfer - Unattended, Attended, Call Blocking with Toll Restriction, Delayed Disconnect
Distinctive Ringing- Calling and Called Number, Off-Hook Warning Tone, Speed Dialing, Repeat Dialing, Three Way
Calling (Media Server required)
|